How to install a fuel filter and air filter on a pocket bike?

this a very simple task with a little mechanical skill. if you have none ask around someone you know will be more than happy to show off there skills. to locate the fuel filter look under the gas tank, secure the gas flow and find the rubber hose attached to it. next follow it along to you find the fuel filter. it will most likely be held on by screw type clamps so loosen them up, and place a rag under it to catch any spilled fuel. now remove the filter and replace it with a new one, make sure you put it in exactly like the one you pulled out. there should be an arrow on it to help you decide which way the fuel flows. now tighten all hose clamps back up and you are done with that. now next the air filter will be a sinch. locate the carburetor by following the hose you were just working on. okay you should be able to see the air filter, just loosen up the hose clamp remove the filter and replace it with a new one. almost done now tighten the clamp, pickup your rags and, turn on your fuel to see if you have any leaks. tighten fuel filter as needed, and your ready to go tear it up.